Lunos e² 60
Paired decentralised fans with a ceramic core — push-pull room ventilation with heat recovery.
Overview
The Lunos e² 60 is a decentralised ventilation system that works in pairs: a ceramic heat-accumulator core stores heat as one fan extracts air, then releases it as the airflow reverses and the fan supplies fresh air. Running pairs in opposite phases gives a room balanced ventilation with heat recovery and no central ductwork.
Key features
- Paired push-pull operation with a ceramic heat-accumulator core
- Decentralised — no central ducting
- Quiet, low-energy continuous ventilation
- Well suited to retrofits and individual rooms
Suitable applications
- Retrofits and renovations
- Individual rooms without central ducting
- Apartments and additions
Technical specifications
| Type | Decentralised push-pull MVHR (installed in pairs) |
|---|---|
| Heat exchanger | Ceramic heat accumulator (regenerative) |
| Airflow | Staged, up to ~38 m³/h per unit |
| Installation | Through external wall (ø160 mm core) |
| Filters | Replaceable; filter-change indicator |
Headline figures — see the datasheet for full performance and dimensional data.
Downloads
Filters & maintenance
Clean filters keep incoming air fresh, protect the heat exchanger and keep the unit running efficiently. Most units need replacement filters every 6–12 months depending on the model and local air quality. We supply the correct filter sets for the Lunos e² 60.
Replacement filters →FAQs
Service or commission your Lunos e² 60
Annual servicing, filter replacement, commissioning and diagnostics across South Australia — including units we didn’t install.